Mimosa C6x 5.15-6.425 GHz 8 dBi Modular Radio for PTMP
PoE Not included
Building on the popular X-series family of modular directional antenna options for flexible distance deployments, the new rugged C6x sets a new bar for affordable speed and interference reduction. With the latest in Wi-Fi 6E OFDMA technologies, and access to new 6 GHz bands1, the C6x achieves extremely low latency speeds of up to 1.75 Gbps and high reliability with new noise fighting features. Supporting the Wi-Fi 5/6/6E standards, the C6x can be deployed as a standard Wi-Fi interoperable client, and provide smooth transitioning in the field for legacy Mimosa and standard Wi-Fi deployments. The C6x can be used as a PTMP (point-to-multipoint) client radio.
Integrated Radio with Modular Antenna Options: The C6x radio’s native 8 dBi gain can be increased to 12, 16, 20 or 25 dBi using modular, X-series, twist-on antennas, offering the ease and simplicity of integrated radios, but with so much more flexibility.
Noise Just Met Its Match: The link reliability of the C6x starts with the high isolation design of the X-series antennas – but there’s so much more that’s new. Based on Wi-Fi 6E OFDMA technologies, the C6x reduces in-band noise impact across the operating channel with dramatically smaller 2 MHz resource units (RU) sizes instead of legacy OFDM solutions, where any noise impacted the full channel.
Incredible Speed and PTMP Scale: Previous OFDM technologies limited the scale of client deployments and the ability to deploy in dense, noisy areas. In PTMP client deployments, the C6x pairs together with new multi-user OFDMA scheduling and beamforming technologies on the A6 access point to enable massive subscriber scaling, advanced noise management, and access to the new low-noise 6 GHz band.

| Link | |
|---|---|
| Max Throughput | 1.75 Gbps IP aggregate UL/DL (2402 Mbps PHY) |
| Modes | Default mode: PTMP client, 100 Mbps |
| Wireless Protocols | WiFi Interop; Auto-TDD (future release); PTMP TDMA (future release) |
| MIMO & Modulation | 2×2, PTMP MU-MIMO client support, OFDMA, BPSK-1024QAM |
| Bandwidth | 20/40/80/160 MHz channels, tunable to 5 MHz increments (Future Release) |
| Frequency Range | PTMP: 5150–6425 MHz1 3 (restricted by country of operation) |
| Max Output Power | 24 dBm |
| Sensitivity ( MCS 0 ) | -87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz |
| Max Power Consumption | 9.2 W |
| System Power Method | Passive PoE |
| PoE Power Supply | Passive POE compliant, 24V and 48–56 V (PoE injector not included) |
| Dimensions | Height: 178mm (5”) Width: 113mm (4.5”) Depth: 67mm (2.6”) |
| Weight | 0.7 kg (1.54 lbs) |
| RF Connector Type | X-series twist-on |
| Mounting | Dual attached pole mount straps |
| Grounding | Ground lug |
| Enclosure Characteristics | Die-cast aluminum, UV stabilized paint, with outdoor UV stable plastic radome lens |
| Outdoor Ingress Protection Rating: | IP67 |
| Operating Temperature: | -40°C to +55°C (-40°F to 131°F) |
| Operating Humidity | 5 to 100% condensing |
| Operating Altitude | 4420 m (14501') maximum |
| Shock & Vibration | ETS 300-019-2-4 class 4M5 |
| Gigabit Ethernet | 10/100/1000-BASE-T |
| Management Services | MMP support; Netconf (future support); SNMPv2c/v3; Syslog; HTTPS; HTML 5 based Web GUI; IPv4 and IPv6/td> |
| Smart Spectrum Management | Active scan monitors/logs ongoing RF interference across channels (no service impact); Dynamic auto-optimization of channel and bandwidth use |
| Security | AES; RADIUS; 802.1x authorization |
| QoS | WiFi Interop Mode WMM; SRS mode supports 4 user configurable QoS levels supporting both CBWFQ and PQ |
| VLAN | Q-in-Q, double tagging, management VLAN, PTMP per client VLAN |
| Regulatory Approvals | FCC Part 15.407; IC RSS210; CE (RED, EMCD, LVD, RoHS); ETSI 301 893/302 502 |
| RoHS Compliance | Yes |
| Safety: | EN 62638-1 |
| FCC ID | 2ABZJ-100-00111 |
| Device Type | Link, PTMP Client Radio |