A5x
● In stock
A5x Connectorized 2×2 Access Point (A5x-EF)
- 700Mbps Max PTMP (IP) Throughput
- 2×2 Two-Port Connectorized
- 5.15–5.85 or 4.9–6.4GHz Extended Frequency
Description
Compact and powerful, the A5x is built for short to long-range pole and tower point-to-multipoint (PTMP) applications. In situations where the power and range of the 4×4 A5c access point isn’t needed, the connectorized, 2×2 A5x is the perfect solution.
PTMP at a Fraction of the Cost: Finding the right access points that offer affordability, without compromising quality and performance, has been a dilemma. The A5x changes that. It’s the ideal solution whether you’re starting a new network or expanding coverage, all while achieving faster ROI.
It’s Fast: Breaking the barriers to entry, the A5x is a connectorized, 2×2 access point that delivers fiber-like speeds of up to 700 Mbps (IP).
Get Around the Noise: With new spectrum becoming available in both 4.9 and 6 GHz, the wide frequency of the A5x (4.9–6.4 GHz with the ROW product) will allow affordable access to more low-noise spectrum for increased speeds and reliability—especially paired with SRS (GPS sync) for channel reuse.
Ultra-Rugged: The A5x, with its die-cast aluminum metal backing, is designed and built to withstand the harshest outdoor elements.
Recommended High-Performance Antenna: While almost any 2×2 3rd party antenna will work with the A5x, the Mimosa N5-45×2 comes most recommended. Get all the ground coverage of a sector, along with the sidelobe rejection of a horn.
Additional information
| Link | |
|---|---|
| Max Throughput | Up to 700 Mbps (IP) |
| Client Capacity | 64 Clients (WiFi Interop); 44 Clients (SRS/GPS sync) |
| Wireless Protocols | WiFi Interop, Spectrum Reuse Synchronization (SRS/GPS sync) |
| MIMO & Modulation | 2×2:2 MIMO OFDM up to MCS9 (256-QAM 5/6) |
| Bandwidth | 20/40/80 MHz channels; Tunable in 5 MHz increments for GPS Sync; Tunable to standard WiFi channels for WiFi Interop |
| Frequency Range | 4900–6400 MHz ROW (PN: 100-00107-1) Restricted by country of operation |
| Max Output Power | 27 dBm |
| Sensitivity ( MCS 0 ) | -87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz |
| Max Power Consumption | 9–12.9 W |
| System Power Method | Passive PoE (24–56 VDC) |
| System Lightning & ESD Protection | 6 kV |
| PoE Power Supply | Passive POE compliant, 24–56 VDC (PoE injector not included) |
| Dimensions | Height: 188.4 mm (7.42” including gland) Width: 75 mm (2.95”) Depth: 44 mm (1.73”) |
| Weight | 0.30 kg (0.70 lbs) |
| Enclosure Characteristics | Outdoor UV-stabilized engineered polymer with integrated mounting back |
| Mounting | Single pole strap (not included) and slip on mount for comparable antennas |
| Connector Type | (2) RP-SMA (female) |
| Outdoor Ingress Protection Rating: | IP67 |
| Operating Temperature: | -40°C to +55°C (-40°F to 131°F) |
| Operating Humidity | 5 to 100% condensing |
| Operating Altitude | 4420 m (14501') maximum |
| Shock & Vibration | ETS 300-019-2-4 class 4M5 |
| Gigabit Ethernet | 10/100/1000BASE-T |
| Collocation Synchronization | 1PPS GPS TX/RX synchronization for collocated co-channel radios; Adjustable up/downstream bandwidth ratio |
| Management Services | Cloud monitoring and provisioning; SNMPv2c/v3; Syslog; HTTPS; HTML 5-based Web GUI; mDNS support; IPv4 and IPv6 |
| Smart Spectrum Management | Active scan monitors/logs ongoing RF interference across channels (no service impact); Dynamic autooptimization of channel and bandwidth use |
| Security | WPA2; AES; RADIUS; 802.1x authorization |
| QoS | Supports 3 user-configurable QoS levels for SRS (GPS Sync) (CBWFQ); Behavior Aggregate (BA) and CoS Classifier, with user-configurable precedence |
| VLANs | Per subscriber VLAN; Management VLAN; CPE data VLAN; Passthrough mode; Untagged traffic control; DSCP-COS mapping |
| GPS Location | GNSS1 (GPS + GLONASS) Regulatory + Compliance |
| Regulatory Approvals | FCC Part 15.407 and Part 90Y, IC RSS210, CE, ETSI 301 893/302 502 |
| RoHS Compliance | Yes |
| Safety: | EN 62638-1 |
| Device Type | Access Point, PMTP |
