A pole/wall-mounted WiFi 6 AP featuring eFEM providing exceptional range performance. The IP65 casing, PoE, and Cudy Mesh features, ideal for high-density park, farm, and parking lot environments.

Wi-Fi 6 con canal de 160 MHz y modulación 1024-QAM ofrece hasta 3 Gbps de rendimiento total.
Tecnologías OFDMA y MU-MIMO permiten conectar más de 100 dispositivos con baja latencia
(máximo 512 dispositivos).

Equipado con cinco amplificadores de potencia y una estructura de antenas 3+2,
este punto de acceso ofrece una señal potente capaz de atravesar obstáculos físicos.

Diseño con protección IP65 contra lluvia y polvo. Incluye protección contra rayos (6 kV)
y descargas electrostáticas (8 kV). Funciona en temperaturas desde -40 °C hasta 70 °C,
ideal para uso exterior.

Permite crear una red Mesh con un solo nombre de Wi-Fi para todo el espacio.
Los dispositivos se conectan automáticamente al nodo con mejor señal,
sin interrupciones ni cambios manuales.

Conecte el adaptador PoE a un router o punto de acceso Cudy compatible para añadir
automáticamente el equipo a la red Mesh. Puede usar conexión inalámbrica o Ethernet
como backhaul.

Compatible con switches PoE para instalaciones más limpias y profesionales.


Permite administrar hasta 200 puntos de acceso mediante el controlador Cudy AP
(modelo C200P), facilitando configuración masiva y actualizaciones de firmware.

| Device Type | Access Point, Indoor, Outdoor, Wi-Fi 6 |
|---|---|
| Link | |
| CPU | 1.3 GHz dual-core |
| Memory Flash/ROM | 128 MB (1 Gbit) NAND |
| DDR/RAM | 256 MB (2 Gbit) DDR3 |
| Speed | 5 GHz Wi-Fi: 2402Mbps |
| Streams | 5 GHz Wi-Fi: 3T3R (3×3 MIMO) |
| Wi-Fi Antennas | 1× Internal+2× External |
| FEM or PA/LNA | 5 GHz: 3× High-Power |
| Detachable Wi-Fi Antennas Connector | RP-SMA Female |
| Beamforming | True |
| Wall Performance | NA |
| Gigabit RJ45 Ports | 1 |
| Ethernet Notes | Accepts PoE powering |
| LED | System |
| Physical Buttons | WPS Button |
| Power Interface | PoE via Ethernet Port |
| Power Methods | 802.3at PoE |
| Power Input-an-unordered-list | PoE: 802.3at, |
| Power Adapter in the Box | Input: 100-240V~, 50/60Hz |
| Max Power Consumption (W) | 18 W |
| Idle Power Consumption (W) | 5 W |
| Advanced | Hardware Watchdog |
| EMC | IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV |
| Environment | Operating Temperature: -40 ℃ ~ 65 ℃ (-40 ℉ ~149 ℉) |
| Ingress Protection Rating | IP65 When devices is installed vertically |
| Certifications | FCC, CE |
| Installation | Wall-mount |
| Dimension | Main Part: |
| Product Weight | 455 g (16.05 oz.) |
| Wi-Fi Standards | Wi-Fi 6 |
| Max Wi-Fi Modulation | 1024-QAM |
| Wi-Fi Efficiency | OFDMA |
| Max Capacity | 256 |
| Recommended Client Upper Limit | 200 |
| Max Wi-Fi Channel Width | 160 MHz |
| Wi-Fi Security | WPA/WPA2/WPA3 |
| WPS | True |
| Operation Modes | Wi-Fi Router |
| Mesh | Cudy Mesh |
| Mesh Backhaul | Wireless Backhaul |
| Multi-Band Backhaul | True |
| WAN Mode | DHCP |
| QoS | Per-User Rate Limiting |
| DHCP | Address Reservation |
| IP Versions | IPv4/IPv6 |
| IPv6 Protocols | Relay |
| IPTV/VLAN | Bridge |
| TTL Customization | Extend |
| IGMP | IGMP Proxy |
| Forwarding | Port Forwarding |
| Firewall | SPI Firewall |
| Application Layer Gateway | IPSec Passthrough |
| Captive Portal | True |
| VPN Server | WireGuard |
| VPN Client | WireGuard |
| DNS Options | DNS over TLS |
| DNS over TLS Providers | Cloudflare |
| Wake on LAN | True |
| Online Detection | True |
| All Devices Management | Wi-Fi Time Schedule |
| Per-Devices Management | Internet On/Off |
| Content Management | Domain Filter |
| LED Control | True |
| Local Control Method | Config Web Page |
| Remote Control Method | Config Page via HTTPS |
| Firmware Upgrade | Local Update |
| Reliability | Timed Reboot |
| Diagnostic Tools | Diagnosis |
| Dashboard Panel | Internet Status |
| Chart | Mesh Topology |
| Internet Failover Sequence | WAN |