POE300 1.0

In Stock

A wall-mounted metal casing PoE adapter injecting up to 60W power to the Ethernet cable to power up the PoE device.

Add to Quote

Brands: Cudy

Device Type	Gigabit PoE, Injector, PoE Adapter
Link	https://www.cudy.com/en-il/products/poe300-1-0#specs
802.3 Protocols	802.3i 10 Mbps over Twisted Pair 802.3u 100 Mbps over Twisted Pair 802.3ab 1 Gbps over Twisted Pair 802.3af PoE 802.3at PoE 802.3bt PoE
Uplink Stream	1× GbE
Downlink Stream	1× GbE, 802.3at/af/bt
Downlink Pin Assignment	Four-Pair
Transimission Distance	Cat. 5e or higher cable: 100 meters at Gigabit Note: Total cable length from the uplink switch through the PoE adapter to the downlink device is measured as one segment
LED	Power PoE Wattage
Power Interfaces	AC Inlet
Power Methods	AC
Power Input	100-240V~ 50/60Hz
Max Power Output	60W
Power Protection	Surge Protection ESD Protection Overvoltage Protection Short-Circuit Protection
EMC	IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Level 4 Surge: RJ45: CM 4kV
Grounding Methods	Three-Prong Plug
Environment	Ambient Operating Temperature: 0~40 ℃ (32~104 ℉) Storage Temperature: -40~60 ℃ (-40~140 ℉) Operating Humidity: 10%~85% non-condensing Storage Humidity: 5%~85% non-condensing
Certifications	FCC, CE
Installation	Desktop Wall-mount
Dimension	145×60×40 mm 5.71×2.36×1.57 inches
Casing Material	Metal
Product Weight	513 g (18.1 oz.)

Shop