Ubiquiti U6+ Access Point is a basic Dual Band WiFi 6 AP (2.4GHz and 5GHz) for smaller halls, warehouses or offices.
The U6+ is capable of great throughputs. In 5 GHz band (2×2 MIMO) it is 2402 Mbps using 160 MHz bandwidth and in 2.4 GHz (2×2 MIMO) it is 574 Mbps ,
Allowing it to support more than 300 concurrently connected clients.
To connect to the network, the Access Point has Gigabit Ethernet with support for active (802.3at) as well as passive (44 to 57V) PoE.

| Link | https://eu.store.ui.com/eu/en/collections/unifi-wifi-flagship-compact/products/u6-plus |
|---|---|
| Dimensions | 160 x 33 mm (6.3 x 1.3") |
| Weight | Without mount: 338 g (0.8 lb) With mount: 413 g (0.9 lb) |
| Enclosure material | Polycarbonate, aluminum |
| Mount material | ABS, SGCC steel |
| Networking interface | (1) GbE RJ45 port |
| Management interface | Ethernet |
| Power method | PoE |
| Supported voltage range | 44–57V DC |
| Max. power consumption | 9W |
| Max. TX power | 2.4 GHz: 23 dBm 5 GHz: 23 dBm |
| MIMO | 2.4 GHz: 2 x 2 5 GHz: 2 x 2 |
| Throughput rate | 2.4 GHz: 573.5 Mbps 5 GHz: 2402 Mbps |
| Antenna gain | 2.4 GHz: 3 dBi 5 GHz: 5.4 dBi |
| LEDs | White/blue |
| Button | Factory reset |
| Mounting | Wall, ceiling (Included) |
| Ambient operating temperature | -30 to 60° C (-22 to 140° F) |
| Ambient operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| WiFi standards | 802.11a/b/g/n/ac/ax |
| Wireless security | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) |
| BSSID | 8 per radio |
| VLAN | 802.1Q |
| Advanced QoS | Per-user rate limiting |
| Guest traffic isolation | Supported |
| Zero-wait DFS | Yes* *Supported with upcoming firmware versions. |
| Concurrent clients | 300+ |
| Software Management application | UniFi Network: Version 7.3.76 and later |
| Device Type | Ceiling-mounted, Unifi |